ECTFE Powder (Ethylene Chlorotrifluoroethylene)

ECTFE (ethylene chlorotrifluoroethylene) powder is supplied in fine form for electrostatic tank, pipe, and equipment linings requiring broad chemical and flame resistance. It offers excellent resistance to acids, bases and oxidizers along with inherently low flame and smoke generation, and a continuous service temperature around 150°C. Particle size is in the fine-to-medium powder range typical of fluoropolymer electrostatic coatings; grades and particle size are confirmed at time of quotation.

Request a Quote Request Custom Specification

~240°CMelting / Softening Point

Fine–MediumParticle Size Range

Custom Made-to-OrderGrade, Size & Quantity

WorldwideExport Shipping

ECTFE Powder — Grades & Specifications

Ethylene Chlorotrifluoroethylene (ECTFE) powder is supplied across a range of grades, particle sizes and morphologies. The options below are typical; specify your target values in the request form and we will confirm availability, lead time and pricing.

Material	Ethylene Chlorotrifluoroethylene (ECTFE)
Category	Fluoropolymer Powders
CAS number	25101-45-5
Melting / softening point	Approx. 240°C for standard grades (up to ~320°C for higher-melt grades)
Particle size	Fine-to-medium electrostatic coating powder, similar range to other fluoropolymer coating powders
Morphology	Fine electrostatic coating powder
Appearance	White to near-colorless powder
Max. continuous service temperature	Approx. 150°C continuous
Typical applications	Chemical Tank & Pipe Linings, Nuclear & Plenum Cable Jacketing, Fume Hood & Ductwork Coatings, Potable Water Tank Linings

Applications by Industry

Chemical Tank & Pipe LiningsElectrostatically coats tanks, pipes and scrubbers exposed to strong acids and oxidizers.

Nuclear & Plenum Cable JacketingJackets wire and cable requiring low flame and smoke generation in critical facilities.

Fume Hood & Ductwork CoatingsCoats fume hoods, ductwork and exhaust systems in corrosive laboratory and industrial settings.

Potable Water Tank LiningsLines water storage tanks and components requiring water-contact-suitable chemical resistance.

Semiconductor Fab Equipment CoatingCoats process tool components in semiconductor fabs needing high purity and inertness.

Structural Steel Corrosion ProtectionApplied to structural steel and hardware in chemical plants for long-term corrosion protection.

Particle Size & Mesh Conversion

Reference for converting between US mesh and microns/millimetres. Figures are nominal sieve openings and may vary slightly by standard.

Mesh (US)	Micron (µm)	mm	Inch	Remarks
3	6730	6.730	0.2650
4	4760	4.760	0.1870
5	4000	4.000	0.1570
6	3360	3.360	0.1320
7	2830	2.830	0.1110
8	2380	2.380	0.0937
10	2000	2.000	0.0787
12	1680	1.680	0.0661
14	1410	1.410	0.0555
16	1190	1.190	0.0469
18	1000	1.000	0.0394
20	841	0.841	0.0331
25	707	0.707	0.0278
30	595	0.595	0.0234
35	500	0.500	0.0197
40	420	0.420	0.0165
45	354	0.354	0.0138
50	297	0.297	0.0117
60	250	0.250	0.0098
70	210	0.210	0.0083
80	177	0.177	0.0070
100	149	0.149	0.0059
120	125	0.125	0.0049
140	105	0.105	0.0041
—	100	0.100	0.0039	Sand
170	88	0.088	0.0035
200	74	0.074	0.0029
—	70	0.070	0.0027
230	63	0.063	0.0024	Human hair
—	55	0.055	0.00217
270	53	0.053	0.0021
—	50	0.050	0.00197
325	44	0.044	0.0017
—	40	0.040	0.00157
400	37	0.037	0.0015
550	25	0.025	0.00099
625	20	0.020	0.00079
1200	12	0.012	0.0005
1250	10	0.010	0.000394
—	7	0.007	0.000276
2500	5	0.005	0.000197
4800	3	0.003	0.000118
5000	2.5	0.0025	0.000099	Bacteria (approx.)
12000	1	0.001	0.0000394

Information Required for Quotation

Grade or type
Particle size (micron or mesh)
Morphology / form (spherical, irregular, granular, etc.)
Quantity
Application environment
Required delivery country

Lead time depends on grade, particle size, quantity and processing requirements. Export availability can be reviewed based on destination country and material type. A Certificate of Analysis can be provided on request.

Request a Quote or Custom Order

Tell us your grade, particle size and quantity. We typically reply within one business day.

Frequently Asked Questions

What grades and particle sizes of ECTFE powder are available?

ECTFE (Ethylene Chlorotrifluoroethylene) powder is supplied with particle size and grade as follows: Fine-to-medium electrostatic coating powder, similar range to other fluoropolymer coating powders Fine electrostatic coating powder. Other grades can be reviewed on request depending on your application and quantity.

What particle sizes can you supply?

Fine-to-medium electrostatic coating powder, similar range to other fluoropolymer coating powders Mesh-based requirements are also accepted; a mesh-to-micron conversion reference is provided on the page.

Can ECTFE powder be made to custom specifications?

Yes. ECTFE powder is produced to order — grade, particle size, morphology and packaging can be customized to your specification. Select “Custom Order” in the request form and provide your target values.

What is the minimum order quantity (MOQ)?

Order quantity is flexible and small quantities and prototype requests are welcome. Please state your required quantity in the form for an accurate quotation.

Can you export and ship ECTFE powder internationally?

Yes, export inquiries are welcome. Availability and shipping are reviewed based on destination country, grade and quantity.

Do you provide a Certificate of Analysis (COA) or technical data?

A Certificate of Analysis and technical data can be provided on request for supplied lots.

Request a Quote for ECTFE Powder

Send us your grade, particle size, quantity and application. We will review availability, quotation and lead time. Small quantities, prototypes and custom made-to-order specifications are welcome.

Request a Quote